Non-Woven Tools
General Information
POLICLEAN® is a coarse-structured non-woven
Application examples
abrasive material made of a special combina-
■■Removal of rust, corrosion stains, scale,
tion of synthetic fibres and abrasive grain.
dirt, stubborn paint or adhesive residue, old
PFERD offers POLICLEAN® tools in several types
coatings or residue of seals or gaskets.
and versions:
■■Cleaning of weld seams, removal of slight
■■POLICLEAN® wheels
drawing marks and heat discolorations,
■■POLICLEAN® mounted tools
especially on stainless steel.
■■COMBIDISC®-POLICLEAN® discs
■■Surface roughening in preparation of adhe-
(refer to COMBIDISC® tools, page 26)
sive bonding or application of fillers.
■■POLICLEAN® discs
■■Cleaning of surfaces of diverse character-
istics.
Advantages
■■The flexible structure adapts ideally to the
Recommendations for use
surface contours and shape of the work-
POLICLEAN® tools perform best at a recom-
piece.
mended peripheral speed of 15-20 m/s, where
■■Open-cell material prevents loading and
the optimum balance between stock removal,
gives cool grinding properties.
surface finishing quality, workpiece tempera-
■■POLICLEAN® tools leave no corrosive residue
ture loads and tool wear is achieved.
on the workpiece surface.
Safety note
For safety reasons, it is imperative to remain
within the stated RPM limit at all times.
Safety recommendations
= Wear eye protection!
= Wear hearing protection!
= Wear a respirator!
= Read the instructions!
Cutting speed POLICLEAN® tools
16.000
In this diagram, the cutting speeds are repre-
sented using blue diagonal lines. The vertical
12.000
line representing the tool dia. meets the given
cutting speed (diagonals). From its point of
10.000
intersection proceed horizontally to the left
9.000
margin where you will find the corresponding
rotational speed [RPM] of the POLICLEAN®
8.000
tools and machine.
7.000
Example
6.000
PCLS 7513/6
5.600
Cutting speed: 15-20 m/s
5.200
Speed range: 3.800-5.000 RPM
4.800
4.400
4.000
3.600
3.200
2.800
2.400
2.000
1.600
50
75
100
150
Tool diameter D [mm]
82
I
204